Series #252509
Toilet wall-mounted Duravit Rimless® #252509
Design by Duravit
/website/html/default/0206.us-en.html?p=4137601
Toilet wall-mounted Duravit Rimless®, 252509
Item may differ from picture. Decorations and accessories are not included.
rimless, washdown model, Durafix included, cUPC® listed*, WaterSense® listed
* Complies with following standards: ASME A112.19.2/CSA B45.1 and ASME A112.19.14, Durafix for concealed installation is included, Wall-mounted toilet is ADA compliant, when installed with a seat height of 17" - 19" from the finished floor, In-wall tank & carrier and actuator plate required for installation
Color
Variants
select© 1.6/0.8 gpf |
14 5/8" x 22 1/2" Inch | 55.8 lb | 2525090092 | 1,190.00 $ * |
© 1.6/0.8 gpf |
14 5/8" x 22 1/2" Inch | 55.8 lb | 2525090092 | 1,190.00 $ * |
© 1.6/0.8 gpf |
14 5/8" x 22 1/2" Inch | 55.8 lb | 2525092092 | 1,270.00 $ * |
* Actual pricing may vary and is determined by the selling retailer/wholesaler/dealer.
Spare parts
|
Noise reduction gasket | 005090 | ||
|
Actuator plate A1, for toilet, plastic | 8 1/2" x 5 3/4" Inch | 0.7 lb | WD5008 |
mechanical actuation, for surface mounted installation, dual flush, mounting frame, mounting hardware included, push rods, front plate plastic | ||||
|
Toilet in-wall tank & carrier, Standard | 23 1/4" x 45 1/4" Inch | 35.3 lb | WD1022 |
WaterSense® listed, For 2"x4" and 2"x6" wall installation, for toilets with a projection of <= 24 5/8", adjustable feet 0" - 9 1/2", SensoWash ready, mechanical front flush actuation, includes in-wall tank, marking of filling height, dual flush, insulated against condensation, Scope of delivery, HDPE wall-mounted toilet connection bend DN 90/90, PE wall-mounted toilet connection set DN 90, wall-mounted mounting rods M12, mounting hardware included, 2 bolt caps, cUPC® listed*, Load capacity = 880 lbs |
Spare parts
Suitable products
Downloads
Hint:
Remarks: Dimensions shown in downloads shall not be used for cut-out templates. Cut-out templates are available upon request. All drawings contain the necessary measurements which are subject to standard tolerances. They are stated in inch and mm, are drawn on a scale of 1:20 and are non-binding. Exact measurements, in particular for customized installation scenarios, can only be taken from the finished ceramic piece.
Instructions
Planning data
Product documentation
Series
Name
dksdsl
My Pro.Duravit
Login
E-Mail
Password
Sign up
Sign up now to take full advantage of all features available at pro.duravit
Register